1.1.1. Voir les WWN

Afficher les cartes fibres:

 probe-scsi-all

Faire un

 cd /pci@1,700000/SUNW,emlxs@0,1 (,1 pour le second port d'une carte dual port)

Puis afficher le WWN

 {0} ok .properties
 status                   okay
 assigned-addresses       82020110 00000000 00104000 00000000 00002000 
                          82020118 00000000 00106000 00000000 00002000 
                          81020120 00000000 00000400 00000000 00000100   
                          82020130 00000000 00180000 00000000 00040000 
 port_wwn                 10 00 00 00 c9 a8 ce 57 
 node_wwn                 20 00 00 00 c9 a8 ce 57 
 alternate-reg            01020120 00000000 00000000 00000000 00000100 
 reg                      00020100 00000000 00000000 00000000 00000000 
                          03020110 00000000 00000000 00000000 00001000 
                          03020118 00000000 00000000 00000000 00000100   
                          02020130 00000000 00000000 00000000 00020000 
 compatible               pci10df,fc20
 clock-frequency          02625a00 
 #size-cells              00000000 
 #address-cells           00000002 
 copyright                Copyright (c) 2000-2006 Emulex
 model                    LPe11002-S
 name                     SUNW,emlxs
 device_type              scsi-fcp
 manufacturer             Emulex
 fcode-version            1.50a9
 fcode-rom-offset         0000c000 
 interrupts               00000002 
 cache-line-size          00000010 
 class-code               000c0400 
 subsystem-id             0000fc22 
 subsystem-vendor-id      000010df 
 revision-id              00000002 
 device-id                0000fc20 
 vendor-id                000010df